Monolith P407

Colors on screen may vary from actual product. Please order a sample to ensure color match

Standard HPL Finish

LAMINATE

Available Product Types

Where to Buy

Find your nearest Distributors

Order a Free Sample*

*Samples only available in standard finishes

Qty:

Pattern Availability
Specifications
Warranty Info
Care & Maintenance

Laminate Type :

|
Basics

Product Type A3Vertical Grade Postforming Laminate (VGP) 0.028''

Finish	Sheet Size	Min Orders	Premium Laminate
CA	• 4' x 8' • 4' x 10'• 5' x 8' • 5' x 10'• 5' x 12'	1	No
CA	• 30'' x 8' • 30'' x 10'• 30'' x 12'	2	No
UL	• 4' x 8' • 5' x 8'• 5' x 10' • 5' x 12'	1	Yes
UL	• 30'' x 8' • 30'' x 10'• 30'' x 12'	2	Yes
VL	• 4' x 8' • 4' x 10'• 5' x 8' • 5' x 10'• 5' x 12'	1	Yes
VL	• 30'' x 8' • 30'' x 10'• 30'' x 12'	2	Yes

IMPORTANT NOTE: Availability is subject to change without notice. 2019-03-22 01:50:58

Product Type A4Horizontal Grade Laminate (HGP) 0.039''

Finish	Sheet Size	Min Orders	Premium Laminate
CA	• 4' x 8' • 4' x 10'• 5' x 8' • 5' x 10'• 5' x 12'	1	No
CA	• 30'' x 8' • 30'' x 10'• 30'' x 12'	2	No
UL	• 4' x 8' • 5' x 8'• 5' x 10' • 5' x 12'	1	Yes
UL	• 30'' x 8' • 30'' x 10'• 30'' x 12'	2	Yes
VL	• 4' x 8' • 4' x 10'• 5' x 8' • 5' x 10'• 5' x 12'	1	Yes
VL	• 30'' x 8' • 30'' x 10'• 30'' x 12'	2	Yes

IMPORTANT NOTE: Availability is subject to change without notice. 2019-03-22 01:50:58

Product Type A5Horizontal Grade Laminate (HGS) 0.048''

Finish	Sheet Size	Min Orders	Premium Laminate
CA	• 4' x 8' • 4' x 10'• 5' x 8' • 5' x 10'• 5' x 12'	1	No
CA	• 30'' x 8' • 30'' x 10'• 30'' x 12'	2	No
UL	• 4' x 8' • 5' x 8'• 5' x 10' • 5' x 12'	1	Yes
UL	• 30'' x 8' • 30'' x 10'• 30'' x 12'	2	Yes
VL	• 4' x 8' • 4' x 10'• 5' x 8' • 5' x 10'• 5' x 12'	1	Yes
VL	• 30'' x 8' • 30'' x 10'• 30'' x 12'	2	Yes

IMPORTANT NOTE: Availability is subject to change without notice. 2019-03-22 01:50:58

By type:

Arborite Laminate Warranty

Technical Data

Manufacturer

Arborite

385 Lafleur, Lasalle (Québec), H8R 3H7

Web site : www.arborite.com - Phone: 1-800-996-0366

Alternate manufacturing facility – Fletcher, NC

Arborite, division of Wilsonart Canada ULC, warrants that, under normal use and service, the material and workmanship of its products shall conform to the standards set forth on the applicate technical data sheets for a period of twelve (12) months from the date of sale to the first consumer purchaser. Dealers and distributors are provided with the technical data sheets which contain specific standards of performance for the products. In the event that an Arborite product does not perform as warranted, the first purchaser’s sole remedy shall be limited to repair or replacement of all or any part of the product which is defective, at the manufacturer’s sole discretion.

This warranty applies only to product :

In its original installation; and
Purchased by the first consumer purchaser.

This warranty is not transferable, and expires upon resale or transfer by the first consumer purchaser.

This warranty shall not apply to defects or damage arising from any of the followings :

Accidents, abuse or misuse;
Exposure to extreme temperature;
Improper fabrication or installation; or
Improper maintenance.

NO OTHER WARRANTIES, EXPRESS OR IMPLIED, ARE MADE. UNDER NO CIRCUMSTANCES SHALL THE MANUFACTURER BE LIABLE FOR ANY LOSS OR DAMAGE ARISING FROM THE PURCHASE, USE OR INABILITY TO USE THIS PRODUCT, OR FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES. NO FABRICATOR, INSTALLER, DEALER, AGENT OR EMPLOYEE OF ARBORITE, A DIVISION OF WILSONART CANADA ULC, HAS THE AUTHORITY TO MODIFY THE OBLIGATIONS OR LIMITATION OF THIS WARRANTY.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state; therefore, some of the limitations stated above may not apply to you. It is to your benefit to save your documentation upon purchase of a product.

Révised: September 2014

Arborite Care & Maintenance Technical Data

Manufacturer

Arborite

385 Lafleur, Lasalle (Québec), H8R 3H7

Web site : www.arborite.com - Phone: 1-800-996-0366 Alternate manufacturing facility – Fletcher, NC

The hard, durable melamine surface of high-pressure decorative laminate will maintain its appearance longer than most other decorative surfacing materials. Unlike other surfacing materials, high-pressure decorative laminates require minimal maintenance. However, the following simple procedures can extend its original appearance.

Always rinse after cleaning

Even the gentlest cleaning agent can leave a residue that may, over time, damage or mar the appearance of your surfaces.

For everyday cleaning, simply wipe the surface with a soft, damp cloth and mild detergent; then rinse thoroughly with warm water and wipe dry.

For stubborn stains, use an all-purpose cleaner, with a damp cloth; then rinse thoroughly with warm water and wipe dry.

For really tough stains, create a paste composed of baking soda and water. Using a soft brush, scrub gently in a circular motion – 10 to 20 strokes should remove most stains (keeping in mind that excessive scrubbing can dull or damage the finish); then rinse thoroughly with warm water and wipe dry.

If all else fails, persistent stains may require the use of undiluted regular bleach or nail polish remover. Apply to the stain and let stand no longer than two minutes; then rinse thoroughly with warm water and wipe dry. This step may be repeated if the stain appears to be fading and the color of the laminate remains unaffected (keep in mind that prolonged exposure to any kind of bleach will cause discoloration).

Avoid harsh chemical cleaners

Many commercial products contain substances that may damage or discolor the surface of laminates. The following should never come in direct contact with your surfaces; if they do, wipe off immediately and rinse the surface thoroughly:

- Toilet bowl cleaners
- Hydrogen peroxide
- Oven cleaners
- Drain cleaners
- Coffee pot cleaners
- Rust removers

Always use an insulated pad or trivet

Although Arborite® decorative laminates are heat resistant, prolonged exposure to temperatures over 135oC (275oF) may cause blistering or other damages to your surfaces. Never place pots and pans removed from the stove or oven directly onto the laminate surface.

Beware of all abrasives

Arborite® decorative laminates resist impact and scratches under normal use. However you should always use a cutting board to avoid scratching the surface with a knife, as this could decrease its wear and stain resistance. Sliding heavy or abrasive objects across the laminate and using steel wood or other abrasive pads can also damage your surfaces and lead to premature wear. In addition, chipping or cracking may occur upon impact with heavy or sharp-edged objects such as dinnerware and cans.

Always protect your surfaces when using staining agents

Hair, textile and food dyes can cause permanent stains. Should you spill this type of product on your laminate surface, immediately wipe it up and rinse several times with cold water.

Pattern Availability

Basics

Product Type A3High Pressure Laminate

Finish	Sheet Size	Min Orders	Premium Laminate
CA	• 4' x 8' • 4' x 10'• 5' x 8' • 5' x 10'• 5' x 12'	1	No
CA	• 30'' x 8' • 30'' x 10'• 30'' x 12'	2	No
UL	• 4' x 8' • 5' x 8'• 5' x 10' • 5' x 12'	1	Yes
UL	• 30'' x 8' • 30'' x 10'• 30'' x 12'	2	Yes
VL	• 4' x 8' • 4' x 10'• 5' x 8' • 5' x 10'• 5' x 12'	1	Yes
VL	• 30'' x 8' • 30'' x 10'• 30'' x 12'	2	Yes

IMPORTANT NOTE: Availability is subject to change without notice.

Product Type A4High Pressure Laminate

Finish	Sheet Size	Min Orders	Premium Laminate
CA	• 4' x 8' • 4' x 10'• 5' x 8' • 5' x 10'• 5' x 12'	1	No
CA	• 30'' x 8' • 30'' x 10'• 30'' x 12'	2	No
UL	• 4' x 8' • 5' x 8'• 5' x 10' • 5' x 12'	1	Yes
UL	• 30'' x 8' • 30'' x 10'• 30'' x 12'	2	Yes
VL	• 4' x 8' • 4' x 10'• 5' x 8' • 5' x 10'• 5' x 12'	1	Yes
VL	• 30'' x 8' • 30'' x 10'• 30'' x 12'	2	Yes

IMPORTANT NOTE: Availability is subject to change without notice.

Product Type A5High Pressure Laminate

Finish	Sheet Size	Min Orders	Premium Laminate
CA	• 4' x 8' • 4' x 10'• 5' x 8' • 5' x 10'• 5' x 12'	1	No
CA	• 30'' x 8' • 30'' x 10'• 30'' x 12'	2	No
UL	• 4' x 8' • 5' x 8'• 5' x 10' • 5' x 12'	1	Yes
UL	• 30'' x 8' • 30'' x 10'• 30'' x 12'	2	Yes
VL	• 4' x 8' • 4' x 10'• 5' x 8' • 5' x 10'• 5' x 12'	1	Yes
VL	• 30'' x 8' • 30'' x 10'• 30'' x 12'	2	Yes

IMPORTANT NOTE: Availability is subject to change without notice.

Specifications

Warranty Info

Arborite Laminate Warranty

Technical Data

Manufacturer

Arborite

385 Lafleur, Lasalle (Québec), H8R 3H7

Web site : www.arborite.com - Phone: 1-800-996-0366

Alternate manufacturing facility – Fletcher, NC

This warranty applies only to product :

In its original installation; and
Purchased by the first consumer purchaser.

This warranty is not transferable, and expires upon resale or transfer by the first consumer purchaser.

This warranty shall not apply to defects or damage arising from any of the followings :

Accidents, abuse or misuse;
Exposure to extreme temperature;
Improper fabrication or installation; or
Improper maintenance.

Révised: September 2014

Care & Maintenance

Arborite Care & Maintenance Technical Data

Manufacturer

Arborite

385 Lafleur, Lasalle (Québec), H8R 3H7

Web site : www.arborite.com - Phone: 1-800-996-0366 Alternate manufacturing facility – Fletcher, NC

Always rinse after cleaning

Even the gentlest cleaning agent can leave a residue that may, over time, damage or mar the appearance of your surfaces.

For everyday cleaning, simply wipe the surface with a soft, damp cloth and mild detergent; then rinse thoroughly with warm water and wipe dry.

For stubborn stains, use an all-purpose cleaner, with a damp cloth; then rinse thoroughly with warm water and wipe dry.

Avoid harsh chemical cleaners

- Toilet bowl cleaners
- Hydrogen peroxide
- Oven cleaners
- Drain cleaners
- Coffee pot cleaners
- Rust removers

Always use an insulated pad or trivet

Beware of all abrasives

Always protect your surfaces when using staining agents

Hair, textile and food dyes can cause permanent stains. Should you spill this type of product on your laminate surface, immediately wipe it up and rinse several times with cold water.

My Cart

Standard collection

Premium Collection

Specialty collection

HPL Technical Guides

Fabrication

Sustainability

Safety Data Sheets (SDS)

Monolith P407

Standard HPL Finish

LAMINATE

Available Product Types

Order a Free Sample*

Product Type A3Vertical Grade Postforming Laminate (VGP) 0.028''

Product Type A4Horizontal Grade Laminate (HGP) 0.039''

Product Type A5Horizontal Grade Laminate (HGS) 0.048''

Arborite Care & Maintenance Technical Data

Always rinse after cleaning

Avoid harsh chemical cleaners

Beware of all abrasives

Always protect your surfaces when using staining agents

Pattern Availability

Basics

Product Type A3High Pressure Laminate

Product Type A4High Pressure Laminate

Product Type A5High Pressure Laminate

Specifications

Warranty Info

Care & Maintenance

Arborite Care & Maintenance Technical Data

Always rinse after cleaning

Avoid harsh chemical cleaners

Beware of all abrasives

Always protect your surfaces when using staining agents

About Us

Products

Reach Us